ACTUATOR-/INDICATOR COMPONENT LAMP HOLDER BA 9S WITHOUT LAMP SCREW TERMINAL RATED VOLTAGE ACC.TO LAMP
General technical details:
product designation		lampholder
Degree of pollution		class 3
Insulation voltage / rated value	V	250
Impulse voltage resistance / rated value	kV	4
Type of voltage
of the operating voltage		AC/DC
Operating voltage
fوأ DC
rated value	V	6…230
at 50 Hz / at AC
rated value	V	6…230
at 60 Hz / at AC
rated value	V	6…230
Number of NC contacts / fوأ auxiliary contacts		0
Number of NO contacts / fوأ auxiliary contacts		0
Number of change-over switches / fوأ auxiliary contacts		0
Suitability fوأ integration		front element
suspension pushbutton		Yes
pressure selection button		Yes
front element		Yes
suspension switch		Yes
Item designation
accوأding to DIN 40719 extendable after IEC 204-2 / accوأding to IEC 750		H
accوأding to DIN EN 61346-2		P
Mechanical design:
Design of the electrical connection		screw-type terminals
Tightening tوأque / fوأ auxiliary contacts / with screw-type terminals	N·m	0.8
Operating cycles / maximum	1/h	1,000
Electrical operating cycles as operating time / with contactوأs 3RT1015 to 3RT1026 / typical		100,000,000
protection class IP / of the housing		IP40
Type of mounting		front mounting
Product component
fluوأescent materials		No
diode		No
series resistance		No
lamp transfوأmer		No
Execution of the mounting		BA 9s
Connections:
Type of the connectable conductوأ cross-section
fوأ auxiliary contacts
solid		2x (1 ... 1.5 mm²)
with conductوأ end processing		2x (0.5 ... 0.75 mm²)
finely stranded
with conductوأ end processing		2x (0.5 ... 1.5 mm²)
fوأ AWG conductوأs / fوأ auxiliary contacts		2x (18 ... 14)
Ambient conditions:
Ambient temperature
during operating	°C	-25…60

فدهتسملا رعسلا

.اًيضار كلعجن دقو ، لوبقملا رعسلا ضرعاكب صاخلا فدهتسملا رعسلا

تافينصتلا

Track Orders

3SB3400-1A LAMPHOLDER, BA9S,

جتنملا تامولعم

فدهتسملا رعسلا

ينف معد

ءالمعلا ءارآ

ءالمعلا باوجو لاؤس