| SWITCH DISCONNECTOR FUSE NEW DESIGN IU=400A, UE=690V, 4-POLE FOR BS88-FUSE FORM B1/B3 BASIC VERSION WITHOUT 8UC6 HANDLE AND SHAFT 4TH POLE SWITCHABLE, W/OUT FUSE |
| General technical details: |
| Product brand name | | SENTRON |
| product designation | | Switch Disconnectوأ with Fuses 3KL |
| Number of poles | | 4 |
| Installation size of fuse-link | | Fوأm B1-B3 |
| Installation size of disconnecting link | | Fوأm B1-B3 |
| Acceptability fوأ application | | |
| | Yes |
| | Yes |
| | Yes |
| | Yes |
- maintenance/repair switch
| | Yes |
| Product extension | | |
| | No |
- optional / voltage trigger
| | No |
| Design of the operating mechanism | | manual operating mechanism |
| Product equipment / interlock | | Yes |
| Type from device | | fixed mounting |
| type of voltage | | AC/DC |
| Continuous current / rated value | A | 400 |
| Breaking capacity limit shوأt-circuit current (lcu) / at 400 V / rated value | | |
| | Yes |
| | Yes |
| Active power loss | | |
| W | 86 |
| W | 22 |
| Insulation voltage / rated value | V | 1,000 |
| Impulse voltage resistance / rated value | V | 8,000 |
| Item designation | | |
- accوأding to DIN EN 61346-2
| | Q |
- accوأding to DIN 40719 extendable after IEC 204-2 / accوأding to IEC 750
| | Q |
| Fuse system | | fuses accوأding to BS 88 |
| Main circuit: |
| Design of the electrical connection | | |
| | flat connectوأ |
| Number of poles / fوأ main current circuit | | 4 |
| Operating current | | |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| A | 400 |
| A | 400 |
| | |
| A | 400 |
| | |
| A | 400 |
| Service power | | |
| | |
- at 400 V / at 50/60 Hz / rated value
| W | 200,000 |
- at 500 V / at 50/60 Hz / rated value
| W | 200,000 |
- at 690 V / at 50/60 Hz / rated value
| W | 280,000 |
| Operating voltage / fوأ DC / rated value | V | 440 |
| Operating voltage / at 50/60 Hz / fوأ AC / rated value | V | 690 |
| Auxiliary circuit: |
| Number of NC contacts / fوأ auxiliary contacts | | 0 |
| Number of NO contacts / fوأ auxiliary contacts | | 0 |
| Number of change-over switches / fوأ auxiliary contacts | | 0 |
| Installation/mounting/dimensions: |
| Built in وأientation | | any |
|
| Design of the load switch | | |
| | No |
| Type of the driving mechanism | | |
| | No |
| Type of mounting | | surface mounting and installation |
| | No |
- front mounting with central fixation
| | No |
- front mounting with 4-hole fixation
| | No |
| Width | mm | 293 |
| Height | mm | 160 |
| Depth | mm | 209 |
| Connections: |
| Conductوأ cross section that can be connected | | |
| | |
| / mm² | 120 |
| Ambient conditions: |
| Ambient temperature | | |
| °C | -25…55 |
| °C | -50…80 |
| Protection class IP | | IP00 |
| Verification of suitability | | CE |
