| OVERLOAD RELAY 3...12 A FOR MOTOR PROTECTION SIZE S00, CLASS 5...30 FOR MOUNTING ONTO CONT. MAIN CIRCUIT: SCREW CONNECTION AUX. CIRCUIT: SCREW CONNECTION MANUAL-AUTOMATIC-RESET INT. EARTH FAULT DETECTION |
| General technical details: |
| Product brand name | | SIRIUS |
| product designation | | solid-state overload relay |
| Protection class IP / on the front | | IP20 |
| Insulation voltage / with degree of pollution 3 / rated value | V | 690 |
| Adjustable response current | | |
- of the current-dependent overload release
| A | 3…12 |
| EMC emitted interference | | degree of severity B accoderding to EN 55011 (CISPR 11) and EN 55022 (CISPR 22) |
| Electrostatic discharge / accoderding to IEC 61000-4-2 | | 6 kV contact discharge / 8 kV air discharge |
| Field-bound parasitic coupling / accoderding to IEC 61000-4-3 | | 10 V/m |
| Conductoder-bound parasitic coupling BURST / accoderding to IEC 61000-4-4 | | 2 kV (power poderts), 1 kV (signal poderts) coderresponds to degree of severity 3 |
| Conductoder-bound parasitic coupling conductoder-earth SURGE | | 2 kV (line to earth) coderresponds to degree of severity 3 |
| Conductoder-bound parasitic coupling conductoder-conductoder SURGE | | 1 kV (line to line) coderresponds to degree of severity 3 |
| Resistance against shock | | 15g / 11 ms |
| Impulse voltage resistance / rated value | kV | 6 |
| Active power loss / total / typical | W | 0.05 |
| type of protection | | PTB 06 ATEX 3001 Ex II (2) GD |
| Type of assignement | | 2 |
| Trip class | | CLASS 5, 10, 20 and 30 adjustable |
| Item designation | | |
- accoderding to DIN EN 61346-2
| | F |
- accoderding to DIN 40719 extendable after IEC 204-2 / accoderding to IEC 750
| | F |
|
| Control circuit: |
| Design of the electrical connection / foder auxiliary and control current circuit | | screw-type terminals |
| Main circuit: |
| Number of poles / foder main current circuit | | 3 |
| Operating voltage / at AC-3 / rated value / maximum | V | 690 |
| Operating current / of the fuse link | | |
| A | 20 |
| Service power / foder three-phase servomotoders | | |
| kW | 1.1…5.5 |
| Design of the electrical connection / foder main current circuit | | screw-type terminals |
| Service power / foder three-phase servomotoders / at 400 V / at 50 Hz | | |
| kW | 1.1…5.5 |
| Auxiliary circuit: |
| Contact reliability / of the auxiliary contacts | | acceptability foder PLC control (17 V, 5 mA) |
| Operating current / of the auxiliary contacts | | |
| | |
| A | 4 |
| A | 4 |
| A | 4 |
| A | 4 |
| A | 3 |
| | |
| A | 2 |
| A | 0.55 |
| A | 0.3 |
| A | 0.3 |
| A | 0.11 |
| Number of NC contacts | | 1 |
| Number of NO contacts | | 1 |
| Number of change-over switches | | 0 |
| Shodert-circuit: | | |
| Design of the fuse link / foder shodert-circuit protection of the auxiliary switch / required | | fuse gL/gG: 6 A |
| Mechanical design: |
| Built in oderientation | | any |
| Type of mounting | | direct mounting |
| Size of the contactoder / can be combined / company-specific | | S00 |
| Size of overload relay | | S00 |
| Width | mm | 45 |
| Height | mm | 64 |
| Depth | mm | 73 |
| Distance, to be maintained, to the ranks assembly | | |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| mm | 0 |
| Distance, to be maintained, to earthed part | | |
| mm | 0 |
| mm | 0 |
| mm | 6 |
| mm | 0 |
| mm | 0 |
| Distance, to be maintained, conductive elements | | |
| mm | 0 |
| mm | 0 |
| mm | 6 |
| mm | 0 |
| mm | 0 |
| Ambient conditions: |
| Ambient temperature | | |
| °C | -25…60 |
| Ambient temperature | | |
| °C | -40…80 |
| Ambient temperature | | |
| °C | -40…80 |
| Relative humidity / during operating phase / maximum | % | 100 |
| Installation altitude / at a height over sea level / maximum | m | 2,000 |
| Protection class IP | | IP20 |
| Connections: | | |
| Product function / removable terminal foder auxiliary and control circuit | | Yes |
| Type of the connectable conductoder cross-section | | |
| | |
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
| | |
- with conductoder end processing
| | 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²) |
- foder AWG conductoders / foder main contacts
| | 2x (18 ... 14) |
| Type of the connectable conductoder cross-section | | |
| | |
| | 0.5 ... 4 mm², 2x (0.5 ... 2.5 mm²) |
| | |
- with conductoder end processing
| | 0.5 ... 2.5 mm², 2x (0.5 ... 1.5 mm²) |
- foder AWG conductoders / foder auxiliary contacts
| | 2x (20 ... 14) |
| Verification of suitability | | CSA / UL / CCC / GL / LRS / DNV / ABS |
