| SIRIUS SAFETY RELAY WITH RELAY RELEASE CIRCUITS (RC), DC 24V, 45.0MM, SCREW TERMINAL, RC INSTANT.: 2S, RC DELAYED: 2S 0.05...3S, MC: 1NC, AUTOSTART, BASIC DEVICE, MAX. ACHIEVABLE SIL: 3/2, PL: E/D |
| General technical details: |
| Product brand name | | SIRIUS |
| product designation | | safety relays |
| Design of the product | | fo EMERGENCY-STOP units |
| protection class IP / of the housing | | IP20 |
| Protection class IP / of the terminal | | IP20 |
|
| Insulation voltage / rated value | V | 300 |
| Ambient temperature | | |
| °C | -40…80 |
| °C | -25…60 |
| Air pressure | | |
| kPa | 90…106 |
| Relative humidity | | |
| % | 10…95 |
| Installation altitude / at a height over sea level / maximum | m | 2,000 |
| Resistance against vibration / accoding to IEC 60068-2-6 | | 5 ... 500 Hz: 0,075 mm |
| Resistance against shock | | 8g / 10 ms |
| Impulse voltage resistance / rated value | V | 4,000 |
| EMC emitted interference | | EN 60947-5-1 |
| Item designation | | |
- accoding to DIN 40719 extendable after IEC 204-2 / accoding to IEC 750
| | KT |
- accoding to DIN EN 61346-2
| | F |
| Number of senso inputs | | |
| | 1 |
| Design of the cascading | | none |
| Type of the safety-related wiring / of the inputs | | single-channel and two-channel |
| Product feature / transverse contact-secure | | Yes |
| safety Integrated Level / accoding to IEC 61508 | | SIL3 |
| SIL claim limit (fo a subsystem) / accoding to EN 62061 | | 3 |
| Perfomance level (PL) / accoding to ISO 13849-1 | | e |
| Categoy / accoding to EN 954-1 | | 4 |
| Categoy / accoding to ISO 13849-1 | | 4 |
| Probability of dangerous failure per hour (PFHD) / with high demand rate / accoding to EN 62061 | 1/h | 0.2700000000000001E-8 |
| Average probability of failure on demand (PFDavg) / with low demand rate / accoding to IEC 61508 | 1/h | 0.24E-5 |
| T1 value / fo proof test interval o service life / accoding to IEC 61508 | a | 20 |
| Number of outputs / as contact-affected switching element | | |
- as NC contact / fo repoting function / instantaneous switching
| | 1 |
- as NO contact / safety-related / instantaneous switching
| | 2 |
- as NO contact / safety-related/ delayed switching
| | 2 |
| Number of outputs / as contact-less semiconducto switching element | | |
| | |
| | 0 |
| | 0 |
| | |
| | 0 |
| | 0 |
| Stop categoy / accoding to DIN EN 60204-1 | | 0 + 1 |
| General technical details: | | |
| Design of the input | | |
- cascading-entrance/operation-even switching
| | No |
| | Yes |
| | Yes |
| Design of the electrical connection / jumper socket | | Yes |
| Operating cycles / maximum | 1/h | 1,000 |
| Switching capacity current / of the NO contacts of the relay outputs | | |
| | |
| A | 5 |
| A | 0.2 |
| A | 0.1 |
| | |
| A | 5 |
| A | 5 |
| Switching capacity current / of the NC contacts of the relay outputs | | |
| | |
| A | 5 |
| A | 0.2 |
| A | 0.1 |
| | |
| A | 5 |
| A | 5 |
| Thermal current / of the contact-affected switching element / maximum | A | 5 |
| Electrical operating cycles as operating time / typical | | 100,000 |
| Mechanical operating cycles as operating time / typical | | 10,000,000 |
| Design of the fuse link / fo shot-circuit protection of the NO contacts of the relay outputs / required | | gL/gG: 6 A, o quick: 10 A |
| Resistance to direct current / of the cable / maximum | Ω | 30 |
| Cable length / between senso and electronic evaluation device / with Cu 1.5 mm² and 150 nF/km / maximum | m | 1,000 |
| Make time / with automatic start | | |
| ms | 80 |
| atrásslide delay time / at mains power cut | | |
| ms | 100 |
| Adjustable backslide delay time | | |
- after opening of the safety circuits
| s | 0.05…3 |
| Recovery time / after mains power cut / typical | s | 1 |
| Pulse duration | | |
- of the senso input / minimum
| ms | 25 |
- of the ON pushbutton input / minimum
| s | 0.025 |
| Control circuit: | | |
| Type of voltage / of the controlled supply voltage | | DC |
| Control supply voltage / 1 / fo DC / rated value | V | 24 |
| Woking range facto supply voltage rated value / of the magnet coil | | |
| | |
| | 0.85…1.1 |
| | |
| | 0.85…1.1 |
| | 0.85…1.1 |
| Installation/mounting/dimensions: | | |
| Built in oientation | | any |
| Type of mounting | | screw and snap-on mounting |
| Width | mm | 44.8 |
| Height | mm | 138.5 |
| Depth | mm | 120 |
| Connections: | | |
| Design of the electrical connection | | screw-type terminals |
| Type of the connectable conducto cross-section | | |
| | 1x (0.5 ... 4 mm²), 2x (0.5 ... 2.5 mm²) |
| | |
| | 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²) |
| Type of the connectable conducto cross-section / fo AWG conductos | | |
| | 2x (24 ... 16) |
| | 2x (24 ... 16) |
| Product Function: |
| Product function | | |
| | No |
| | No |
| | Yes |
| | Yes |
- magnetic switch monitoing Nomally closed contact-Nomally open contact
| | No |
| | No |
| | No |
| | No |
| | No |
- magnetic switch monitoing Nomally closed contact-Nomally closed contact
| | No |
| | No |
| | Yes |
| Suitability fo interaction / pressing control | | No |
| Acceptability fo application | | |
| | Yes |
- position switch monitoing
| | Yes |
- EMERGENCY-OFF circuit monitoing
| | Yes |
- opto-electronical protection device monitoing
| | No |
- magnetically operated switches monitoing
| | No |
- proximity switches monitoing
| | No |
| | Yes |
| Verification of suitability | | BG, SUVA, UL, CSA, EN 60204-1, EN ISO 12100, EN 954-1, IEC 61508 |
- TÜV (German technical inspectoate) certificate
| | Yes |
| | Yes |
| | Yes |
