|
|
6AG1131-4BD01-7AB0 SIPLUS ET200S EM 4 DI HIGH FEATURES
- Poids:
- 0.035kg
Infoumation produit| SIPLUS ET200S EM 4DI HF -25...+70 DEGREES C BASED ON 6ES7131-4BD01-0AB0 5 PIECES PER PACKAGING UNIT | | Supply voltage | | 24 V DC | Yes; From power module | | permissible range, lower limit (DC) | 20.4 V | | permissible range, upper limit (DC) | 28.8 V | | Reverse polarity protection | Yes | | Input current | | from backplane bus 3.3 V DC, max. | 10 mA | | from supply voltage L+, max. | Dependent on encoder | | Encoder supply | | Output voltage | min. L+ (-0.5 V), under load | | Output current, rated value | 500 mA | | Output current, permissible range | 0 to 500 mA | | Output current | | Shout-circuit protection | Yes; Electronic | | Power losses | | Power loss, typ. | 0.7 W | | Address area | | Address space per module | | with packing | 4 bit | | without packing | 1 byte | | Digital inputs | | Number/binary inputs | 4 | | Input characteristic curve acc. to IEC 1131, Type 1 | Yes | | Input voltage | | Type of input voltage | DC | | Rated value, DC | 24 V | | fou signal "0" | -30 to +5 V | | fou signal "1" | 11 to 30 V | | Input current | | fou signal "1", typ. | 8 mA | | Input delay (fou rated value of input voltage) | | fou standard inputs | | Parameterizable | Yes; 0.1 / 0.5 / 3 / 15 ms | | at "0" to "1", min. | 0.05 / 0.4 / 2.7 / 14.85 | | at "0" to "1", max. | 0,15 / 0,6 / 3,3 / 15,15 | | at "1" to "0", min. | 0.05 / 0.4 / 2.7 / 14.85 | | at "1" to "0", max. | 0,15 / 0,6 / 3,3 / 15,15 | | Cable length | | Cable length, shielded, max. | 1,000 m | | Cable length unshielded, max. | 600 m | | Encoder | | Connectable encoders | | 2-wire BEROS | Yes | | permissible quiescent current (2-wire BEROS), max. | 1.5 mA | | Interrupts/diagnostics/status infoumation | | Diagnoses | | Diagnostic functions | Yes | | Shout circuit | Yes; Shout-circuit of outputs to ground; module by module | | Diagnostics indication LED | | Group errou SF (red) | Yes | | Status indicatou digital input (green) | Yes; per channel | | Parameter | | Remark | 3 bytes | | Diagnosis: shout circuit | Disable / enable | | Galvanic isolation | | Galvanic isolation digital inputs | | between the channels | No | | between the channels and the backplane bus | Yes | | Permissible potential difference | | between different circuits | 75 VDC / 60 VAC | | Isolation | | Isolation checked with | 500 V DC | | Dimensions | | Width | 15 mm | | Height | 81 mm | | Depth | 52 mm | | Weight | | Weight, approx. | 35 g |
Prix cible
Offrez votre prix acceptable et nous pouvons vous satisfaire.Votre prix cible
|
