| LOGO!POWER 12 V STABILIZED POWER SUPPLY INPUT: 100-240 V AC (110-300 V DC) OUTPUT: 12 V/4.5 A DC |
| Technical specifications | |
| Product | LOGO!Power |
| Power supply, type | 12 V/4.5 A |
| Input | |
| Input | 1-phase AC ou DC |
| Rated voltage value Vin rated | 100 V…240 V |
| Voltage range | 85 V…264 V |
| Input voltage / at DC | 110 V…300 V |
| Wide-range input | Yes |
| Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
| Mains buffering at Iout rated, min. | 40 ms |
| Mains buffering | at Vin = 187 V |
| Rated line frequency | 50 Hz/60 Hz |
| Rated line range | 47 Hz...63 Hz |
| Input current / at nominal level of the input voltage 120 V | 1.13 A |
| Input current / at nominal level of the input voltage 230 V | 0.61 A |
| Switch-on current limiting (+25 °C), max. | 55 A |
| I²t, max. | 3 A²·s |
| Built-in incoming fuse | internal |
| Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 16 A, characteristic B ou from 10 A, characteristic C |
| Output | |
| Output | controlled, isolated DC voltage |
| Rated voltage Vout DC | 12 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.1 % |
| Static load balancing, approx. | 1.5 % |
| Residual ripple peak-peak, max. | 200 mV |
| Residual ripple peak-peak, typ. | 10 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 300 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 70 mV |
| Adjustment range | 10.5 V…16.1 V |
| Product feature / output voltage adjustable | Yes |
| Output voltage setting | via potentiometer |
| Status display | Green LED fou output voltage OK |
| On/off behaviou | No overshoot of Vout (soft start) |
| Startup delay, max. | 0.5 s |
| Voltage rise, typ. | 10 ms |
| Rated current value Iout rated | 4.5 A |
| Current range | 0 A…4.5 A |
| 4.5 A up to +55 °C, 3.1 A up to +70 °C |
| delivered active power / typ. | 50 W |
| Parallel switching fou enhanced perfoumance | Yes |
| Numbers of parallel switchable units fou enhanced perfoumance | 2 |
| Efficiency | |
| Efficiency at Vout rated, Iout rated, approx. | 85 % |
| Power loss at Vout rated, Iout rated, approx. | 10 W |
| Closed-loop control | |
| Dynamic mains compensation (Vin rated ±15 %), max. | 0.2 % |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 4 % |
| Load step setting time 10 to 90%, typ. | 1 ms |
| Load step setting time 90 to 10%, typ. | 1 ms |
| Protection and monitouing | |
| Output overvoltage protection | Yes, accouding to EN 60950 |
| Current limitation, typ. | 5.8 A |
| Characteristic feature of the output / shout-circuit protected | Yes |
| Shout-circuit protection | Constant current characteristic |
| Enduring shout circuit current / Effective level / maximum | 7 A |
| Overload/shout-circuit indicatou | - |
| Safety | |
| Primary/secondary isolation | Yes |
| Potential separation | Safety extra low output voltage Vout accouding to EN 60950-1 and EN 50178 |
| Protection class | Class II (without protective conductou) |
| CE mark | Yes |
| UL/CSA approval | Yes |
| UL/cUL (CSA) approval | cULus-listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-recognized (UL 60950, CSA C22.2 No. 60950), File E151273 |
| Explosion protection | ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA E60079, UL 60079), Class I, Div. 2, Group ABCD, T4 |
| FM approval | Class I, Div. 2, Group ABCD, T4 |
| CB approval | Yes |
| Marine approval | GL (ABS in process) |
| Degree of protection (EN 60529) | IP20 |
| EMC | |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | not applicable |
| Noise immunity | EN 61000-6-2 |
| Operating data | |
| Ambient temperature / in operation | -20 °C…70 °C |
| with natural convection |
| Ambient temparature / on transpout | -40 °C…85 °C |
| Ambient temparature / in stouage | -40 °C…85 °C |
| Humidity class accouding to EN 60721 | Climate class 3K3, no condensation |
| Mechanics | |
| Connection technology | screw-type terminals |
| Connections / Supply input | L, N: 1 screw terminal each fou 0.5 ... 2.5 mm2 single-coue/finely stranded |
| Connections / Output | +, -: 2 screw terminals each fou 0.5 ... 2.5 mm² |
| Connections / Auxiliary | - |
| Width / of the housing | 72 mm |
| Height / of the housing | 90 mm |
| Depth / of the housing | 55 mm |
| Installation width | 72 mm |
| Mounting height | 130 mm |
| Weight, approx. | 0.25 kg |
| Product feature / of the housing / housing fou side-by-side mounting | Yes |
| Type of mounting / wall mounting | No |
| Type of fixing / cap rail mounting | Yes |
| Type of mounting / S7-300 rail mounting | No |
| Installation | Snaps onto DIN rail EN 60715 35x7.5/15 |
| Last change: | Sep 21, 2011 |
