SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN |
Supply voltage |
Load voltage L+ |
Rated value (DC) | 120 V |
Load voltage L1 |
Rated value (AC) | 230 V |
Input current |
from backplane bus 5 V DC, max. | 100 mA |
Power losses |
Power loss, typ. | 4.5 W |
Digital outputs |
Number/binary outputs | 16; Relay |
Lamp load, max. | 50 W; 230 V AC |
Output current |
for signal "1" rated value | 2 A |
for signal "1" minimum load current | 10 mA |
Switching frequency |
with resistive load, max. | 1 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 1 Hz |
mechanical, max. | 10 Hz |
Aggregate current of outputs (per group) |
horizontal installation |
up to 60 °C, max. | 8 A |
vertical installation |
up to 40 °C, max. | 8 A |
Relay outputs |
Rated input voltage of relay L+ (DC) | 24 V |
Number of operating cycles | 100000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A) |
Switching capacity of contacts |
with inductive load, max. | 2 A; 2 A (230 V AC), 2 A (24 V DC) |
Switching frequency/contacts/at ohmic load/maximum | 2 A; 2 A (230 V AC), 2 A (24 V DC) |
Cable length |
Cable length, shielded, max. | 1000 m |
Cable length unshielded, max. | 600 m |
Interrupts/diagnostics/status information |
Alarms |
Diagnostic alarm | No |
Diagnoses |
Diagnostics | No |
Wire break | No |
Short circuit | No |
Fuse blown | No |
Missing load voltage | No |
Diagnostics indication LED |
Rated load voltage PWR (green) | No |
Fuse OK FSG (green) | No |
Galvanic isolation |
Galvanic isolation digital outputs |
between the channels, in groups of | 8 |
between the channels and the backplane bus | Yes; Optocoupler |
Isolation |
Isolation checked with | 1500 V AC |
Connection method |
required front connector | 20-pin |
Dimensions |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weight |
Weight, approx. | 250 g |