| AS-INTERF. MODULE SLIMLINE,IP20 S22.5, DIGITAL, 4I, 2/3-WIRE 4 X 1 INPUT, 200MA, PNP SCREW-TYPE TERMINAL CONNECT. MODULE WIDTH 22.5 MM |
| General technical data: |
| Design of the product | | SlimLine S22.5 - I/O modules fo operation in the control cabinet, IP20 |
| Design of the slave type | | standard slave |
| Type | | 4 inputs |
| I/O configuration | | 0 |
| ID/ID2 code | | 0/F |
| Protocol / will be suppoted / AS interface protocol | | Yes |
| AS interface / total current input / max | mA | 270 |
| operating voltage | | |
- accoding to AS-Interface spezification
| V | 26.5…31.6 |
| Addressing | | front addressing socket |
| Design of the electrical connection / of the inputs and outputs | | screw-type terminals |
| Item designation | | |
- accoding to DIN 40719 extendable after IEC 204-2 / accoding to IEC 750
| | A |
- accoding to DIN EN 61346-2
| | K |
| note | | An external additional supply (AUX POWER) of 20 to 30 V DC is required fo the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III. |
| Senso supply: |
| Type of voltage supply / fo the senso supply | | using AS-Interface |
| Input voltage | V | 20…30 |
| Characteristic feature of the senso supply / shot-circuit and overload resistant | | Yes |
| Current carrying capacity / of the senso supply / fo all inputs | | |
- at ambient temperature 40 °C
| mA | 200 |
| Inputs: |
| Number of digital inputs | | 4 |
| type of the connection technology | | 2 and 3-conducto technology |
| Input circuit | | PNP transisto |
| Type of voltage / of the input voltage | | DC |
| Inputs / switching level High / min | V | 10 |
| Input current / at the digital input | | |
| mA | 5 |
| mA | 1.5 |
| Inputs / senso supply using AS-Interface | | shot-circuit and overload resistant |
| Outputs: |
| Number of digital outputs | | 0 |
| Output voltage / at 24 V | | |
| V | 22…24 |
| Status display |
| | yellow LED |
| | green LED |
| | red LED |
| Assignment of data bits |
| | IN1 |
| | IN2 |
| | IN3 |
| | IN4 |
| Ambient conditions: |
| Ambient temperature | | |
| °C | -25…70 |
| °C | -40…85 |
| Protection class IP | | IP20 |
| Mechanical design: |
| Width | mm | 22.5 |
| Height | mm | 102 |
| Depth | mm | 86 |
| Type of mounting | | 35 mm standard rail mounting o wall mounting using push-in lugs |
| Conducto cross-section | | |
| | 1 x (0.5 - 4) mm² o 2 x (0.5 - 2.5) mm² |
| | |
| | 1 x (0.5 - 2.5) mm² o 2 x (0.5 - 1.5) mm² |
| | AWG 2 x (20 - 14) mm² |
| AS-Interface certificate | | yes (o requested fo in case of new units) |
| Approvals | | UL, CSA, shipbuilding (o requested fo in case of new units) |
