SIRIUS,CENTRAL MOD. 3RK3 BASIC FOR MODULAR SAFETY SYSTEM 3RK3 4/8 F-DI, 1F-RO, 1 F-DO, 24V DC PARAMETERIZABLE VIA SW MSS ES WIDTH 45MM SPRING-LOADED TERMINAL UP TO CATEGORY 4 (EN954-1) UP TO SIL3 (IEC 61508) UP TO PERFORMANCE LEVEL E (ISO 13849-1) |
General technical data: |
Product brand name | | SIRIUS |
product designation | | Modular Safety System 3RK3 |
Design of the product | | central module - basic |
Protection class IP | | IP20 |
Resistance against shock | | 15g / 11 ms |
Degree of pollution | | 3 |
Built in oientation | | vertical |
Installation altitude / at a height over sea level / maximum | m | 2,000 |
Ambient temperature | | |
| °C | -20…60 |
| °C | -40…85 |
| °C | -40…85 |
Relative humidity | | |
| % | 95…10 |
Conducto-bound parasitic coupling BURST / accoding to IEC 61000-4-4 | | 2 kV (power pots) |
Conducto-bound parasitic coupling conducto-earth SURGE / accoding to IEC 61000-4-5 | | 2 kV |
Conducto-bound parasitic coupling conducto-conducto SURGE / accoding to IEC 61000-4-5 | | 1 kV |
Electrostatic discharge / accoding to IEC 61000-4-2 | | 4 kV contact discharge / 8 kV air discharge |
Field-bound parasitic coupling / accoding to IEC 61000-4-3 | | 10 V/m, 3 V/m, 1 V/m |
Impulse voltage resistance / rated value | V | 2,500 |
Insulation voltage / rated value | V | 300 |
Item designation / accoding to DIN 40719 extendable after IEC 204-2 / accoding to IEC 750 | | K |
Item designation / accoding to DIN EN 61346-2 | | K |
Product function | | |
| | Yes |
| | Yes |
- protective doo monitoing with tumbler
| | No |
| | No |
| | No |
- muting, 4 senso sequential
| | No |
- monitoing parameterizable
| | No |
- evaluation: contact-free acting protection device
| | Yes |
- evaluation: selecto switch
| | Yes |
| | Yes |
- evaluation: two-hand control panel
| | Yes |
- evaluation: enabling switch
| | Yes |
| | Yes |
Protocol / will be suppoted / PROFIBUS DP protocol | | No |
Protocol / optional / will be suppoted / PROFIBUS DP protocol | | Yes |
Control circuit: |
type of voltage | | DC |
Control supply voltage / 1 / fo DC / rated value | V | 24 |
Operating range facto control supply voltage rated value | | |
| | 0.85…1.15 |
Auxiliary circuit: |
Product function | | |
| | Yes |
| | Yes |
Number of inputs | | |
| | 8 |
| | 0 |
Number of outputs | | |
- as contact-affected switching element / safety-related
| | |
| | 1 |
| | 0 |
- as contact-less semiconducto switching element
| | |
- safety-related / 2-channel
| | 1 |
- not safety-oiented / 2-channel
| | 0 |
- to the test of contact afflicated sensos
| | 2 |
Shot-circuit: |
Design of the fuse link / fo shot-circuit protection of the contact afflicted switching element / required | | NH Typ 3NA, DIAZED Typ 5SB, NEOZED Typ 5SE |
Installation/mounting/dimensions: |
Type of mounting | | standard rail |
Width | mm | 45 |
Height | mm | 113 |
Depth | mm | 124 |
Connections: |
Product function / removable terminal fo auxiliary and control circuit | | Yes |
Design of the electrical connection / fo auxiliary and control current circuit | | spring-loaded terminals |
Conducto cross-section that can be connected / fo auxiliary contact | | |
| mm² | 0.25…1.5 |
| | |
- with conducto end processing
| mm² | 0.25…1.5 |
- without conducto final cutting
| mm² | 0.25 |
AWG number / as coded connectable conducto cross-section | | |
| | 20…16 |
Type of the connectable conducto cross-section / fo auxiliary contacts | | |
| | 2x (0.25 ... 1.5 mm²) |
| | |
- with conducto end processing
| | 2x (0.25 ... 1.5 mm²) |
- without conducto final cutting
| | 2x (0.25 ... 1.5 mm²) |
Type of the connectable conducto cross-section / fo AWG conductos | | |
| | 2x (20 ... 16) |
safety Integrated Level / accoding to IEC 61508 | | SIL3 |
Perfomance level (PL) / accoding to ISO 13849-1 | | e |
Categoy / accoding to EN 954-1 | | 4 |
Probability of dangerous failure per hour (PFHD) / with high demand rate / accoding to EN 62061 | 1/h | 0.514E-8 |
Average probability of failure on demand (PFDavg) | | 0.0000128 1/y |
T1 value / fo proof test interval o service life / accoding to IEC 61508 | a | 20 |
Stop categoy / accoding to DIN EN 60204-1 | | 0 / 1 |
|
Cax online generato: |