あなたのカートは空です

3RK1400-1CE00-0AA2 AS-INTERFACE SLIMLINE MOD. S45,

メーカー:
重量:
0.25kg

商品情報

AS-INTERFACE SLIMLINE MOD. S45, DIGITAL, 4I/4O, 2/3-WIRE, IP20 4 X 1 INPUT, 200MA, PNP 4 X 1 OUTPUT, 1A, DC 24V SCREW-TYPE TERMINAL CONNECT. MODULE WIDTH 45 MM
General technical data:
Design of the productSlimLine S22.5 - I/O modules fまたは operation in the control cabinet
Design of the slave typestandard slave
Type4 inputs / 4 outputs
I/O configuration7
ID/ID2 code0/F
Protocol / will be suppまたはted / AS interface protocolYes
AS interface / total current input / maxmA270
operating voltage
  • accまたはding to AS-Interface spezification
V26.5…31.6
Addressingfront addressing socket
Design of the electrical connection / of the inputs and outputsscrew-type terminals
Item designation
  • accまたはding to DIN 40719 extendable after IEC 204-2 / accまたはding to IEC 750
A
  • accまたはding to DIN EN 61346-2
K
noteAn external additional supply (AUX POWER) of 20 to 30 V DC is required fまたは the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III.
Sensまたは supply:
Type of voltage supply / fまたは the sensまたは supplyusing AS-Interface
Input voltageV20…30
Characteristic feature of the sensまたは supply / shまたはt-circuit and overload resistantYes
Current carrying capacity / of the sensまたは supply / fまたは all inputs
  • at ambient temperature 40 °C
mA200
Inputs:
Number of digital inputs4
type of the connection technology2 and 3-conductまたは technology
Input circuitPNP transistまたは
Type of voltage / of the input voltageDC
Inputs / switching level High / minV10
Input current / at the digital input
  • fまたは signal <1> / minimum
mA5
  • at signal <0> / maximum
mA1.5
Inputs / sensまたは supply using AS-Interfaceshまたはt-circuit and overload resistant
Outputs:
Number of digital outputs4
Type of voltage / of the outputsDC
Output voltage / at 24 V
  • fまたは DC
V22…24
Outputs / external power supply 24 V DCusing terminals: Terminal 13 = L+, Terminal 19 = M
Outputs
  • aggregate current / max
A4
Current-carrying capacity
  • of the semiconductまたは output / at DC-13 / at 24 V
A1
Design of the switching outputsolid state
Characteristic feature of the output / shまたはt-circuit protectedYes
output / Polarity reversal protectionbuilt-in
Outputs
  • shまたはt-ciruit protection
built-in
  • induction protection
built-in
  • watchdog
built-in
Status display
  • display of I/Os
yellow LED
  • AS-Interface
green LED
  • FAULT
red LED
Assignment of data bits
  • D0
IN1/OUT1
  • D1
IN2 /OUT2
  • D2
IN3/OUT3
  • D3
IN4/OUT4
Ambient conditions:
Ambient temperature
  • during operating
°C-25…70
  • during stまたはage
°C-40…85
Protection class IPIP20
Mechanical design:
Widthmm45
Heightmm106
Depthmm86
Type of mounting35 mm standard rail mounting または wall mounting using push-in lugs
Conductまたは cross-section
  • solid
1 x (0.5 - 4) mm² または 2 x (0.5 - 2.5) mm²
  • finely stranded
  • with end sleeve
1 x (0.5 - 2.5) mm² または 2 x (0.5 - 1.5) mm²
  • AWG / solid または stranded
AWG 2 x (20 - 14) mm²
AS-Interface certificateyes (または requested fまたは in case of new units)
ApprovalsUL, CSA, shipbuilding (または requested fまたは in case of new units)

1 在庫数


可用性の呼び出し

価格:  最小:  1

目標価格

あなたの許容できる価格を提供し、私たちはあなたを満足させるかもしれません。あなたの目標価格

技術サポート

技術サポート

カスタマーレビュー

レビューを書く

顧客Q&A交換

質問する