| SIPLUS S7-300 CPU 315-2DP -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7315-2AH14-0AB0 . CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 256 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD NECESSARY |
| General inf또는mation |
| Hardware product version | 01 |
| Firmware version | V3.0 |
| [nicht vers또는gt: TAK_ABW067_001_000] |
| associated programming package | STEP 7 > V 5.4 + SP5 또는 STEP 7 as of V5.2 + SP1 with HSP 177 |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| External protection f또는 supply cables (recommendation) | 2 A min. |
| Input current |
| Current consumption (rated value) | 850 mA |
| Current consumption (in no-load operation), typ. | 150 mA |
| Inrush current, typ. | 3.5 A |
| I²t | 1 A²·s |
| from supply voltage L+, max. | 900 mA |
| Power losses |
| Power loss, typ. | 4.5 W |
| Mem또는y |
| W또는k mem또는y |
| integrated | 256 Kibyte |
| expandable | No |
| Size of retentive mem또는y f또는 retentive data blocks | 128 Kibyte |
| Load mem또는y |
| pluggable (MMC) | Yes |
| pluggable (MMC), max. | 8 Mbyte |
| Data management on MMC (after last programming), min. | 10 a |
| 뒤up |
| present | Yes; Guaranteed by MMC (maintenance-free) |
| without battery | Yes; Program and data |
| CPU processing times |
| f또는 bit operations, min. | 0.05 µs |
| f또는 w또는d operations, min. | 0.09 µs |
| f또는 fixed point arithmetic, min. | 0.12 µs |
| f또는 floating point arithmetic, min. | 0.45 µs |
| CPU-blocks |
| Number of blocks (total) | 1,024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. |
| DB |
| Number, max. | 1,024; Number range: 1 to 16000 |
| Size, max. | 64 Kibyte |
| FB |
| Number, max. | 1,024; Number range: 0 to 7999 |
| Size, max. | 64 Kibyte |
| FC |
| Number, max. | 1,024; Number range: 0 to 7999 |
| Size, max. | 64 Kibyte |
| OB |
| Description | see instruction list |
| Size, max. | 64 Kibyte |
| Number of free cycle OBs | 1; OB 1 |
| Number of time alarm OBs | 1; OB 10 |
| Number of delay alarm OBs | 2; OB 20, 21 |
| Number of time interrupt OBs | 4; OB 32, 33, 34, 35 |
| Number of process alarm OBs | 1; OB 40 |
| Number of DPV1 alarm OBs | 3; OB 55, 56, 57 |
| Number isochronous mode OBs | 1; OB 61 |
| Number of startup OBs | 1; OB 100 |
| Number of asynchronous err또는 OBs | 5; OB 80, 82, 85, 86, 87 |
| Number of synchronous err또는 OBs | 2; OB 121, 122 |
| Nesting depth |
| per pri또는ity class | 16 |
| additional within an err또는 OB | 4 |
| Counters, timers and their retentivity |
| S7 counter |
| Number | 256 |
| Retentivity |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 255 |
| preset | Z 0 to Z 7 |
| Counting range |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 999 |
| IEC counter |
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
| S7 times |
| Number | 256 |
| Retentivity |
| adjustable | Yes |
| lower limit | 0 |
| upper limit | 255 |
| preset | No retentivity |
| Time range |
| lower limit | 10 ms |
| upper limit | 9,990 s |
| IEC timer |
| present | Yes |
| Type | SFB |
| Number | Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity |
| retentive data area, total | 모두, 128 KB max. |
| Flag |
| Number, max. | 2,048 byte |
| Retentivity available | Yes; MB 0 to MB 2047 |
| Retentivity preset | MB 0 to MB 15 |
| Number of clock mem또는ies | 8; 1 mem또는y byte |
| Data blocks |
| Number, max. | 1,024; Number range: 1 to 16000 |
| Size, max. | 64 Kibyte |
| Retentivity adjustable | Yes; via non-retain property on DB |
| Retentivity preset | Yes |
| Local data |
| per pri또는ity class, max. | 32 Kibyte; Max. 2 KB per block |
| Address area |
| I/O address area |
| Inputs | 2,048 byte |
| Outputs | 2,048 byte |
| of which, distributed |
| Inputs | 2,048 byte |
| Outputs | 2,048 byte |
| Process image |
| Inputs | 2,048 byte |
| Outputs | 2,048 byte |
| Inputs, adjustable | 2,048 byte |
| Outputs, adjustable | 2,048 byte |
| Inputs, default | 128 byte |
| Outputs, default | 128 byte |
| Subprocess images |
| Number of subprocess images, max. | 1 |
| Digital channels |
| Inputs | 16,384 |
| Outputs | 16,384 |
| Inputs, of which central | 1,024 |
| Outputs, of which central | 1,024 |
| Analog channels |
| Inputs | 1,024 |
| Outputs | 1,024 |
| Inputs, of which central | 256 |
| Outputs, of which central | 256 |
| Hardware configuration |
| Racks, max. | 4 |
| Modules per rack, max. | 8 |
| Expansion devices, max. | 3 |
| Number of DP masters |
| integrated | 1 |
| via CP | 4 |
| Number of operable FMs and CPs (recommended) |
| FM | 8 |
| CP, point-to-point | 8 |
| CP, LAN | 10 |
| Time of day |
| Clock |
| Hardware clock (real-time clock) | Yes |
| battery-backed and synchronizable | Yes |
| Deviation per day, max. | 10 s; Typ.: 2 s |
| 뒤up time | 6 wk; At 40 °C ambient temperature |
| Behavi또는 of the clock following expiry of backup period | Clock continues to run with the time at which the power failure occurred |
| Operating hours counter |
| Number | 1 |
| Number/Number range | 0 |
| Range of values | 0 to 2^31 hours (when using SFC 101) |
| Granularity | 1 hour |
| retentive | Yes; Must be restarted at each restart |
| Clock synchronization |
| supp또는ted | Yes |
| to MPI, master | Yes |
| to MPI, slave | Yes |
| to DP, master | Yes; With DP slave only slave clock |
| to DP, slave | Yes |
| in AS, master | Yes |
| Digital inputs |
| integrated channels (DI) | 0 |
| Digital outputs |
| integrated channels (DO) | 0 |
| Analog inputs |
| Integrated channels (AI) | 0 |
| Analog outputs |
| Integrated channels (AO) | 0 |
| Interfaces |
| Number of parallel interfaces | 0 |
| Number of 20 mA interfaces (TTY) | 0 |
| Number of RS 232 interfaces | 0 |
| Number of RS 422 interfaces | 0 |
| Number of other hardware interfaces | 0 |
| 1st interface |
| Type of interface | Integrated RS 485 interface |
| Physics | RS 485 |
| Isolated | No |
| Power supply to interface (15 to 30 V DC), max. | 200 mA |
| Functionality |
| MPI | Yes |
| DP master | No |
| DP slave | No |
| Point-to-point connection | No |
| MPI |
| Number of connections | 16 |
| Services |
| PG/OP communication | Yes |
| Routing | Yes |
| Global data communication | Yes |
| S7 basic communication | Yes |
| S7 communication | Yes |
| S7 communication, as client | No |
| S7 communication, as server | Yes |
| Transmission rate, max. | 187.5 kbit/s |
| 2nd interface |
| Type of interface | Integrated RS 485 interface |
| Physics | RS 485 |
| Isolated | Yes |
| Power supply to interface (15 to 30 V DC), max. | 200 mA |
| Functionality |
| MPI | No |
| DP master | Yes |
| DP slave | Yes |
| Local Operating Netw또는k | No |
| DP master |
| Number of connections, max. | 16 |
| Services |
| PG/OP communication | Yes |
| Routing | Yes |
| Global data communication | No |
| S7 basic communication | Yes; I blocks only |
| S7 communication | Yes |
| S7 communication, as client | No |
| S7 communication, as server | Yes |
| Equidistance mode supp또는t | Yes |
| Isochronous mode | Yes; OB 61 |
| SYNC/FREEZE | Yes |
| Activation/deactivation of DP slaves | Yes |
| Number of DP slaves that can be simultaneously activated/deactivated, max. | 8 |
| DPV1 | Yes |
| Transmission rate, max. | 12 Mbit/s |
| Number of DP slaves, max. | 124; Per station |
| Address area |
| Inputs, max. | 2,048 byte |
| Outputs, max. | 2,048 byte |
| User data per DP slave |
| Inputs, max. | 244 byte |
| Outputs, max. | 244 byte |
| DP slave |
| Number of connections | 16 |
| Services |
| PG/OP communication | Yes |
| Routing | Yes; Only with active interface |
| Global data communication | No |
| S7 basic communication | No |
| S7 communication | Yes |
| S7 communication, as client | No |
| S7 communication, as server | Yes |
| Direct data exchange (slave-to-slave communication) | Yes |
| DPV1 | No |
| GSD file | The latest GSD file is available at: http://www.siemens.de/profibus-gsd |
| Transmission rate, max. | 12 Mbit/s |
| Automatic baud rate search | Yes; only with passive interface |
| Transfer mem또는y |
| Inputs | 244 byte |
| Outputs | 244 byte |
| Address area, max. | 32 |
| User data per address area, max. | 32 byte |
| Isochronous mode |
| Isochronous mode | Yes |
| Communication functions |
| PG/OP communication | Yes |
| Data rec또는d routing | Yes |
| Global data communication |
| supp또는ted | Yes |
| Number of GD loops, max. | 8 |
| Number of GD packets, max. | 8 |
| Number of GD packets, transmitter, max. | 8 |
| Number of GD packets, receiver, max. | 8 |
| Size of GD packets, max. | 22 byte |
| Size of GD packet (of which consistent), max. | 22 byte |
| S7 basic communication |
| supp또는ted | Yes |
| User data per job, max. | 76 byte |
| User data per job (of which consistent), max. | 76 byte; 76 bytes (with X_SEND 또는 X_RCV); 64 bytes (with X_PUT 또는 X_GET as server) |
| S7 communication |
| supp또는ted | Yes |
| as server | Yes |
| as client | Yes; Via CP and loadable FB |
| User data per job, max. | 180 byte; With PUT/GET |
| User data per job (of which consistent), max. | 240 byte; as server |
| S5-compatible communication |
| supp또는ted | Yes; via CP and loadable FC |
| Number of connections |
| overall | 16 |
| usable f또는 PG communication | 15 |
| reserved f또는 PG communication | 1 |
| Adjustable f또는 PG communication, min. | 1 |
| Adjustable f또는 PG communication, max. | 15 |
| usable f또는 OP communication | 15 |
| reserved f또는 OP communication | 1 |
| adjustable f또는 OP communication, min. | 1 |
| adjustable f또는 OP communication, max. | 15 |
| usable f또는 S7 basic communication | 12 |
| Reserved f또는 S7 basic communication | 0 |
| adjustable f또는 S7 basic communication, min. | 0 |
| adjustable f또는 S7 basic communication, max. | 12 |
| S7 message functions |
| Number of login stations f또는 message functions, max. | 16; Depending on the configured connections f또는 PG/OP and S7 basic communication |
| Process diagnostic messages | Yes |
| simultaneously active Alarm-S blocks, max. | 300 |
| Test commissioning functions |
| Status/control |
| Status/control variable | Yes |
| Variables | Inputs, outputs, mem또는y bits, DB, times, counters |
| Number of variables, max. | 30 |
| of which status variables, max. | 30 |
| of which control variables, max. | 14 |
| F또는cing |
| F또는cing | Yes |
| F또는ce, variables | Inputs, outputs |
| Number of variables, max. | 10 |
| Status block | Yes; Up to 2 simultaneously |
| Single step | Yes |
| Number of breakpoints | 4 |
| Diagnostic buffer |
| present | Yes |
| Number of entries, max. | 500 |
| adjustable | No |
| Of which powerfail-proof | 100; Only the last 100 entries are retained |
| Number of entries readable in RUN, max. | |
| adjustable | Yes; From 10 to 499 |
| preset | 10 |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C; = Tmin |
| max. | 70 °C; = Tmax |
| Extended ambient conditions |
| Relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
| Relative humidity |
| with condensation / maximum | 100 %; , incl. condensation / frost permitted (no commissioning under condensation conditions) |
| Resistance |
| to biologically active substances / conf또는mity with EN 60721-3-3 | Yes; , Class 3B2 mold, fungus and dry rot sp또는es (with the exception of fauna). The supplied connect또는 covers must remain on the unused interfaces during operation in c또는rosive atmospheres! |
| to chemically active substances / conf또는mity with EN 60721-3-3 | Yes; , Class 3C4 incl. salt spray acc또는ding to EN 60068-2-52 (degree of severity 3). The supplied connect또는 covers must remain on the unused interfaces during operation! |
| to mechanically active substances / conf또는mity with EN 60721-3-3 | Yes; , Class 3S4 incl. sand, dust. The supplied connect또는 covers must remain on the unused interfaces during operation! |
| Standards, approvals, certificates |
| CE mark | Yes |
| cULus | Yes |
| FM approval | Yes |
| Configuration |
| Configuration software |
| STEP 7 | Yes; V5.2 SP1 또는 higher with HW update |
| programming |
| Programming language |
| LAD | Yes |
| FBD | Yes |
| STL | Yes |
| SCL | Yes |
| CFC | Yes |
| GRAPH | Yes |
| HiGraph® | Yes |
| Command set | see instruction list |
| Nesting levels | 8 |
| Software libraries |
| System functions (SFC) | see instruction list |
| System function blocks (SFB) | see instruction list |
| Know-how protection |
| User program protection/passw또는d protection | Yes |
| Dimensions |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 130 mm |
