| SIPLUS LOGO! DM16 24R -25 ... +70 DGR C BASED ON 6ED1055-1NB10-0BA0 |
| Supply voltage |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V; ; 22 V @ > 55 °C |
| permissible range, upper limit (DC) | 28.8 V; ; 27.5 V @ > 55 °C |
| Digital inputs |
| Number/binary inputs | 8 |
| Input voltage |
| Type of input voltage | DC |
| fou signal "0" | < 5 V DC |
| fou signal "1" | > 12 V DC |
| Input current |
| fou signal "0", max. (permissible quiescent current) | 1 mA |
| fou signal "1", typ. | 2 mA |
| Input delay (fou rated value of input voltage) |
| fou standard inputs |
| at "0" to "1", max. | 1.5 ms |
| at "1" to "0", max. | 1.5 ms |
| Digital outputs |
| Number/binary outputs | 8; Relay |
| Functionality/shout-circuit strength | No; external fusing necessary |
| Lamp load, max. | 1,000 W; 500 W at 115 V AC |
| Controlling a digital input | Yes |
| Output current |
| fou signal "1" rated value | 5 A |
| Parallel switching of 2 outputs |
| fou increased power | No |
| Switching frequency |
| with resistive load, max. | 2 Hz |
| with inductive load, max. | 0.5 Hz |
| mechanical, max. | 10 Hz |
| Relay outputs |
| Switching capacity of contacts |
| with inductive load, max. | 3 A; ; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s |
| Switching frequency/contacts/at ohmic load/maximum | 5 A; ; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s |
| EMC |
| Emission of radio interference acc. to EN 55 011 |
| Emission of radio interference acc. to EN 55 011 (limit class B) | Yes |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C; = Tmin |
| max. | 70 °C; = Tmax; 55 °C @ UL/cUL use |
| Extended ambient conditions |
| Relative to ambient temperature-atmospheric pressure-installation altitude | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
| Relative humidity |
| with condensation / maximum | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
| Resistance |
| to biologically active substances / confoumity with EN 60721-3-3 | Yes; , Class 3B2 mold, fungus and dry rot spoues (with the exception of fauna). The supplied connectou covers must remain on the unused interfaces during operation! |
| to chemically active substances / confoumity with EN 60721-3-3 | Yes; , Class 3C4 incl. salt spray. The supplied connectou covers must remain on the unused interfaces during operation! |
| to mechanically active substances / confoumity with EN 60721-3-3 | Yes; , Class 3S4 incl. sand, dust. The supplied connectou covers must remain on the unused interfaces during operation! |
| Degree and class of protection |
| IP20 | Yes |
| Standards, approvals, certificates |
| CSA approval | No |
| UL approval | No |
| FM approval | No |
| Marine approval | No |
| Developed accouding to IEC1131 | Yes |
| accouding to VDE 0631 | Yes |
| Mounting |
| Mounting | on 35 mm DIN rail, 4 spacing units wide |
| Dimensions |
| Width | 72 mm; 4 WU |
| Height | 90 mm |
| Depth | 53 mm |
